TANKING SYSTEMS

What we do

STAGE 1

Before we start we need to remove all water pipes away from the walls, all electrical Sockets, and may have to pay for the removal of the electric meter if wall mounted (Your supplier may not charge for this service) please phone them, Then we will.

STAGE 2

1. Sandblast all walls
2. Grind out all pointing 10mm deep
3. Spray Antisulphate solution wait overnight
4. Dig out floor to 400mm deep
5. Remove floor to skips
6. Re-point walls and install fixing point for pipes and sockets
7. Lay new floor and wait to dry
8. Render all walls and spray with SBR Bonding agent
9. 2nd coat of render and spray with SBR
10. 1st coat of k11
11. point all weak spots between the floor and walls, horizontal and vertical with barrier mortar
12. 2nd coat of k11
13. spray walls with SBR Bonding agent and apply Renderlite backing
14. spray walls with SBR Bonding agent and apply Renderlite finish plaster
15. 2 coats of multi finish plaster
16. fit concure unit as required
17. skip hire